Mitsubishi Electric 800 Series Instruction Manual page 4

r
1
CAUTION
A
[Precautions Regarding Startup and Maintenance]
Before using forced output to the PC CPU or making changes to the data while the equipment is in
operation, be sure to read the manual carefully and obsetve all safety precautions conscientiously.
Incorrect operation could damage the machinery and cause accidents.
Do not directly touch the conductive parts or electronic parts of the GOT unit, power supply mod-
ule, communication module, or memory cassette. Doing so could result in malfunction or trouble or
could take the components out of compliance with EMC specifications.
Do not disassemble or modify the GOT unit, power supply module, communication module, or
memory cassette except when replacing the backlight. Doing so could result in malfunction or
damage or take the components out of compliance with EMC specifications.
1
CAU'TION
n
[Precautions When Handling and Installing the EMC Box]
Install the EMC Box in the panel by firmly tightening the screws. If the screws are loose the Box
could fall off causing damage or trouble with the equipment or taking it out of compliance with
EMC specifications.
The EMC Box will become hot after the power to the GOT is turned on but this will not effect the
GOT performance.
CAUTION
[Precautions Regarding Discarding]
When discarding this product, it should be handled as an industrial discard.
@
DANGER
[Precautions When Replacing the Backlight]
When replacing the backlight, turn off the GOT power (When the GOT is connected to a bus, turn off
the PC CPU power), and first remove the GOT main unit from the panel. If left in the panel, the GOT
could fall and cause an injury. If this is done while the power is on it could cause electric shock.
1
CAUTION
n
[Precautions When Replacing the Backlight]
Do not touch the GOT'S circuit board or electronic components when replacing the backlight.
Doing so could result in malfunction or damage or take the components out of compliance with
EMC specifications.
1
CAUTION
A
[Precautions When Discarding the Backlight]
When discarding the backlight, it should be handled as an industrial diseard.
b
4