Mitsubishi Electric 800 Series Instruction Manual page 13

2. System Configuration MEL!iiEC GOT
2.2.2 System Configuration Precaution Items
a]
Power Supply Module handling and installation method
Refer to the GOT User's Manual.
Power wire, ground wire, FD mesh wire connection method
@ Connect the power supply wires and ground wires as shown in the diagram I:)elow,
and when they are within 100mm (3.94 inch) from the Power Supply Module's termi-
nal block, be sure to install the ferrite core (ZCAT3035-1330 made by TDK) s~~pplied
in the package in the Power Supply Module.
AC input
) (
@ When grounding a ground wire in the control panel then ground it in the same position
as the LG wire and the shield mesh.
@
To prevent radiated noise when configuring a GOT with a Power Supply M'odule,
install the FG mesh wire included in the packaging with the Power Supply Mo~:lule to
the Power Supply Module FG terminal and then attach it to the screw holes on the
bottom of the EMC Box.
EMC Box
\
Power Supply
FG mesh wire
Module
ground area