Mitsubishi Electric 800 Series Instruction Manual page 23

2 . System Configuration MEL,SEC GOT
2.6 Precaution Items When Re~lacinn the Liauid Crystal Backlight
Take the following precautions when replacing the backlight. If these precautions are nut taken
then the GOT unit will not comply with the EMC specifications.
Replace the backlight without touching the metal plated areas or metal plated components of
the printed circuit boards.
-
Replace the backlight so that dust, oil, and scale do not get on the metal plated areas or metal
plated parts of the printed circuit boards.
For information on replacing the backlight refer to the GOT User's Manual.
2.7 Module Power Consum~tion
The power consumption for each module is shown below.
GOT unit
I
I
Power consumption
(~(:m
.
,
A8GT-70GOT-EB-EU
A8GT-70GOT-SW-EU 0.9A (TYP)
Product name
I
A8GT-70GOT-SB-EU 0.9A (WP)
Bus Connection Module A7GT-BUS2-EU 50mA (WP)
Serial Communication Module A8GT-RS4-EU
70mA TTYP)
Model name