WARNING: To prevent personal injury and/or equipment damage,
● Always store the Mounting Bolts in the threaded holes of the Lifting Plate.
● Only qualified personal shall perform inspections of this device; do not use if damaged,
altered, or in poor condition.
Inspection
Before each use, an approved inspector must inspect this device for bends, cracks, dents, or elongated
holes. If damage is found, discontinue use.
Replacement
Replace damaged components of this device with only parts listed in this document.
Disposal
At the end of its useful life, dispose of this device according to federal, state, and local regulations.
Page 4 of 4
SP04545468 Ver 03
INSPECTION AND MAINTENANCE
© Bosch Automotive Service Solutions Inc.
NOTE: Always store
the Mounting Bolts in
the threaded holes of
the Lifting Plate.