Safety Precautions - Bosch EN-53248 Parts List And Operating Instructions

The safety signal word designates the degree or level of hazard seriousness.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not
avoided, may result in property damage.
WARNING: To prevent personal injury and/or equipment damage,
● Study, understand, and follow all safety precautions and operating instructions before
using this device. If the operator cannot read instructions, all operating instructions
and safety precautions must be read and discussed in the operator's native language.
● Wear eye protection that meets ANSI Z87.1, CE EN166, AS/NZS 1337, and OSHA standards.
● Only qualified operators may install, operate, adjust, maintain, clean, inspect, or transport
this device.
● Inspect the condition of the this device before each use; do not use if damaged, altered,
or in poor condition.
● Wear personal protective equipment that meets ANSI and OSHA standards.
● Use this device on the LT6 Corvette engines only.
● Do not exceed the rated capacity shown on this device.
● Do not work underneath a load supported by this device.
● Do not use this device for anything other than its intended purpose.
● No alterations shall be made to this device.
● Replace damaged components of this device with only parts listed in this document.
● Always store the Mounting Bolts in the storage holes of the Lift Plate.
Page 2 of 4
SP04545468 Ver 03
Explanation of Safety Signal Words

SAFETY PRECAUTIONS

© Bosch Automotive Service Solutions Inc.