Introduction - ACCURAT FLUX 850 Instruction Manual

1. Introduction

1.1. General Description
Thank you for purchasing the Accurat FLUX 850 UPS!
The FLUX Series single-phase uninterruptible power supply (UPS) incorporates
automatic voltage regulation (AVR) technology and line interactive topology. It is a
reliable source of consistent AC power and can work with a wide range of electric
inputs. Suitable for small and home office environments, the Accurat FLUX 850
UPS provides power for sensitive and nonsensitive electronic devices such as
desktop computers, networking devices, workstations, printers, chargers, and home
entertainment systems.
1.2. Disclaimer
Please read the user manual carefully and ensure you understand it before using the
device. Improper use of this device may cause serious injury, product damage, and
property loss. Keep this document in an accessible place for future reference.
Upon using this device, we will consider that you accept all the terms and conditions
in this document. Accurat is not liable for any loss caused by the user's failure to use
the device in compliance with the Disclaimer and Safety Instructions.
Accurat reserves the right to the final interpretation of this document and all
documents related to the device. Some images in this document are provided
as a guideline only, and they may not accurately reproduce the depicted product
components. To obtain the latest product information, please visit our website:
www.autobatterienbilliger.de.
IMPORTANT!
The UPS is NOT a power source, and thus NOT designed for sustained operation on
a battery. Its main purpose is to provide enough time for users to finish or save their
work and safely shut down their devices.
The nominal backup time is around 15 minutes at half load and around 5 minutes at
full load. Run times vary based on the power consumption by connected devices.
The closer to full power is drawn, the less backup time remains. A fully loaded
UPS doesn't provide a long backup time in Battery Mode and wears the batteries
down faster over time. It's highly recommendable to size the UPS and optimize the
connected loads up to 75% of the UPS maximum power output.
Although you can use the UPS immediately, the maximum backup time will not be
available right away. Charging the batteries for a minimum of 6 hours before use is
recommended.
17