Troubleshooting - MAJORITY Naga 80 User Manual

Observation
No power/function
No sound
No sound in Bluetooth mode
Function disturbance
No sound when connected and
switched to OPTICAL IN mode
No sound when connected and
switched to ARC mode.
Remote control function issues

Troubleshooting

Potential Cause/Solution
Check that the power is switched on at the
wall socket.
Check that the power adapter is properly
connected to the power outlet.
Check whether the unit is set to MUTE.
Check that cables are properly installed. If
cables are properly installed, please try
connecting to your TV using an alternative
cable.
Check if the unit is switched on and set in the
correct mode.
Check that your Bluetooth device is paired.
Check that you have pressed the 'PAIR' button
before pairing.
Check if the soundbar is paired with another
device, unpair and try again.
Increase volume on soundbar.
Check whether external device requires
password '0000'.
Switch off and unplug the unit. Leave for 2
minutes and switch the soundbar on again.
If a particular mode is causing problems,
please try an alternative connection to your TV
such as Optical or Bluetooth.
Check and ensure the audio setting of the
input source (e.g. TV, games console, DVD
player etc.) is set to PCM mode while using
digital connection (such as Optical, HDMI or
RCA).
1.Check and ensure the audio setting of the
input (e.g. TV, games console etc.) is set to
ARC mode while using digital connection.
2.Check whether the ARC cable is correctly
connected to the ARC terminal.
1.Check the supplied ARC cable and try and try
a different ARC cable.
3.If not, the soundbar is unable to play the
input signal. Change the TV's audio output to
other digital input – PCM, and so as the
Soundbar - OPTICAL
Check whether the battery needs to be
replaced, try new ones.
Check whether there are obstacles blocking
the remote sensor.
EN
15