Bluetooth - MAJORITY Naga 80 User Manual

Bluetooth

EN
Bluetooth
The Majority NAGA 80 can be paired via Bluetooth with a Bluetooth-enabled device
such as a Smart TV, PC, Phone, Tablet or similar that you would like to play audio from
via the soundbar.
Press the 'POWER' button on the soundbar (Ref.3) or on the remote control (Rem.13)
to switch on the unit.
Press the 'INPUT' button repeatedly on the remote control (Rem.14) or press the
INPUT button on the soundbar (Ref.4) repeatedly until Bluetooth Mode is selected.
While searching for a device to pair with, the 'BT' flashing is displayed on the LCD
screen.
Switch your device's Bluetooth connectivity on and start searching for the soundbar.
Select the 'NAGA 80' from your device's list when prompted to pair with the soundbar.
If a password is required, enter '0000'. If you encounter issues at this stage, please
refer to the user manual of your device for instructions on pairing and connecting with
other Bluetooth devices.
When successfully connected, a beep will be heard from the soundbar, and the 'BT'
will stop flashing. After initial pairing, the unit will stay paired unless manually unpaired
by the user, or until the device is reset.
If your device should become unpaired or you find it is unable to connect, repeat the
above steps.
To unpair the soundbar from a paired device press and hold the 'PAIR' button on
remote control (Rem.27) for 3 seconds to disconnect.
Please note: The Majority NAGA 80 is not compatible with Bluetooth earbuds.
14