Bluetooth Operation - MAJORITY SNO-BAR-BLK Instruction Manual

Instructions Guide

Bluetooth Operation

Pairing a Bluetooth Device for the First Time
Press the POWER button on the unit or the POWER button on
the remote control to switch on the unit.
Select and press the BT button directly on the remote control or
press the SOURCE button repeatedly to enter Bluetooth mode,
indicated by a flashing blue light.
Using the native controls on your Bluetooth device, select the
"YW-S05"in your Bluetooth settings to pair.
If your device requests a password, enter the default "0000". Refer
to the "user's manual" for your specific device for instructions on
pairing and connecting Bluetooth devices.
When successfully paired and connected, a beep will issue from
the unit and the Pairing Indicator will display a solid blue light.
After initial pairing, the unit will stay paired unless unpaired
manually by the user, or until it is erased due to a reset of the
device.
Soundbar has Bluetooth connected to a device, you can press
MUTE/PAIR button 3 seconds to exit this device in order to pair
the device with another Bluetooth device.
If your device should become unpaired or you find it is unable to
connect, repeat the above steps.
10