Bluetooth Operation - MAJORITY SCAFELL PIKE II Instruction Manual

Instructions Guide

Bluetooth Operation

Pairing a Bluetooth Device for the First Time
Press the POWER button on the unit (Ref.4) or the POWER
button on the remote control (Ref.11) to switch on the unit.
Select and press the INPUT button directly on the remote control
(Ref.21) or press the SOURCE button repeatedly on the soundbar
(Ref.5) to enter Bluetooth mode, indicated by a flashing blue
light.
Using the native controls on your Bluetooth device, select the
"Majority Scafell Pike II" in your Bluetooth settings to pair.
If your device requests a password, enter the default "0000".
Refer to the "user manual" for your specific device for instructions
on pairing and connecting Bluetooth devices.
When successfully paired and connected, a beep will issue from
the unit and the Pairing Indicator will display a solid blue light.
After initial pairing, the unit will stay paired unless unpaired
manually by the user, or until it is erased due to a reset of the
device.
If the soundbar is Bluetooth connected to a device, you can
press the PAIR button for 3 seconds to exit this device in order to
pair the device with another Bluetooth device.
If your device should become unpaired or you find it is unable to
connect, repeat the above steps.
16
Playi
Follow
Use th
select
To pla
on th
Audio
be he