Furuno TZT22X Operator's Manual page 4

Points/boundaries
Points can be entered on the chart plotter display (radar, fish finder and weather displays also) to mark important
locations such as a good fishing spot. Point attributes (position, symbol type, color, etc.) are recorded to the Points
list. Also, boundaries can be set at the position desired (net position, area to avoid, etc.).
How to enter a point
Tap where to enter a point.
How to set a point as destination
On-screen point On-screen point
Tap
Tap a point or the location
to set as destination.
Points list Points list
Tap
Lists
Tap [Lists] on the
home page.
How to set a boundary
Tap
Tap the position where to
set a boundary.
Tap
If a point was tapped.
Tap
Tap
Tap
On-screen point
Tap
Purple line (with arrow):
Indicates course to go to
the destination.
Yellow line:
Shortest course from own
ship to the destination.
Sort the list by date, name, icon, color, range.
Tap
Tap the point to set as the destination. Tap the point to set as the destination.
Tap
Tap the shape to use for
the boundary.
4 4
The point is entered
on the screen.
Selected location
Destination point
Notice Notice Notice Notice Notice
Note: [Find on Chart] puts the
selected point at the screen center.
[Area]/[Line]: Tap neces-
sary points to complete
Tap
the boundary, referring to
"Route" on the next page.
[Circle]: Drag icons to
adjust the size and
position, and then tap
[End Boundary].