Instrument Display - Furuno TZT22X Operator's Manual

Instrument Display

With connection of appropriate sensors, the instrument display shows various navigation data.
How to enable the instrument display
Add the instrument display icon to the home page to show the instrument display.
Tap
How to switch instrument displays (ex. full display)
Sailing display Sailing display
How to edit the instrument display
Tap
53
Tap the instrument display,
then tap [Edit Page] on the
pop-up menu.
How to remove or change an indication
Tap
53
In the edit mode, tap the
indication to remove or change.
How to add an indication
Tap
53
In the edit mode, tap a location
not occupied by an instrument display.
TZT19F Tap
Swipe rightward or leftward
to switch between displays.
Edit mode Edit mode Edit mode Edit mode Edit mode
A white line surrounds each
indication.
Tap a size in desired category.
14 14
p y
Tap
1
2
After setting, tap [ ].
(Incorporation in multi-
screen is also possible.)
Rudder
53
To end the edit mode To end the edit mode To end the edit mode To end the edit mode To end the edit mode
Tap the screen, then tap [End Edit] on
the pop-up menu.
- Remove indication: Tap [Remove].
- Change size: Tap [Small], [Medium], [Large],
[Double Extra Large]*.
- Change type: Tap [Change Type], then tap
desired size.
- Change indication: Tap indication in [NAVIGA-
TION DATA], [ROUTE INFORMATION], [WIND
AND WEATHER], and [ENGINE].
*: Numeric displays only
Tap
3
Drag
Cruising display Cruising display
In the edit mode, you can remove,
change, add, rearrange indications.
53
Tap added instrument display to
change displayed data (see
above).