FINAL INSTALLATION
3. Attach blade arms (M) to the bottom of motor
housing (H) with motor screws/lock washers
(N) previously removed (Step 5, page 8).
Tighten motor screws/lock washers (N)
securely. NOTE: Make sure to completely
secure each blade arm (M) before
proceeding to the next.
4.
Remove three light kit fitter screws (O) from
outer edge of motor plate.
Connect female plug from motor housing (H)
to male plug from light kit fitter (I), matching
up the colors on the plugs for correct fit.
Make sure plugs connect tightly.
Carefully arrange wiring within light kit fitter
5.
(I).
Align holes in light kit fitter (I) with holes in
motor plate. Re-insert light kit fitter screws
(O) previously removed and tighten until
secure.
3
4
O
Motor
plate
I
5
Motor
plate
O
15
H
M
N
Female
plug
Male
plug
I
K
H
O
O