Table of Contents
Advertisement
Quick Links
ITEM #5497065
EASTBROOK LED
CEILING FAN
MODEL #EST52MBK5LR
Español p. 22
ATTACH YOUR RECEIPT HERE
ADJUNTE SU RECIBO AQUÍ
Purchase Date
4007498
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at
800-527-1292, 8:30 a.m. - 5 p.m., CST, Monday - Friday.
1
Advertisement
Table of Contents
Summary of Contents for Eastbrook EST52MBK5LR
- Page 1 ITEM #5497065 EASTBROOK LED CEILING FAN MODEL #EST52MBK5LR Español p. 22 ATTACH YOUR RECEIPT HERE ADJUNTE SU RECIBO AQUÍ Purchase Date 4007498 Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 800-527-1292, 8:30 a.m. - 5 p.m., CST, Monday - Friday.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Safety Information .........................2 Package Contents ........................5 Hardware Contents .......................6 Preparation ..........................6 Initial Installation ........................6 Downrod-Style Fan Mounting ....................8 Closemount-Style Fan Mounting ..................10 Wiring ..........................11 Final Installation ........................14 Operating Instructions ......................16 Care and Maintenance .......................19 Troubleshooting........................20 Limited Lifetime Warranty ....................21 Replacement Parts List ......................21 SAFETY INFORMATION CAUTION: Changes or modifications not approved by the party responsible for compliance could void... - Page 3 SAFETY INFORMATION READ AND SAVE THESE INSTRUCTIONS • Do not discard fan carton or foam inserts. Should this fan need to be returned to the factory for repairs, it must be shipped in its original packaging to ensure proper protection against damage that might exceed the initial cause for return.
- Page 4 SAFETY INFORMATION WARNING To reduce the risk of fire, electrical shock or personal injury, do not bend the blade arms when installing them, balancing the blades, or cleaning the fan. Do not insert objects between the rotating fan blades. To reduce the risk of personal injury, use ONLY parts provided with this fan. The use of parts OTHER than those provided with this fan will void the warranty.
-
Page 5: Package Contents
PACKAGE CONTENTS PART DESCRIPTION PART DESCRIPTION QUANTITY QUANTITY Remote Control Receiver Mounting Bracket Canopy Mounting Screw/ Blade Arm Lock Washer (preassembled) Motor Screw/Lock Washer (preassembled) + 1 extra Downrod Light Kit Fitter Screw Pin (preassembled) (preassembled) Clip (preassembled) Shade Canopy Socket Ring Remote Pack (preassembled) -
Page 6: Hardware Contents
HARDWARE CONTENTS (shown actual size) Fiber Blade Blade Wire Screw Washer Connector Qty. 15 Qty. 15 Qty. 3 + 1 extra + 1 extra PREPARATION Before beginning assembly of product, make sure all parts are present. Place motor on carpet or on foam to avoid damage to finish. - Page 7 INITIAL INSTALLATION 2. Determine mounting method to use. A. Downrod mount (standard or angled ceiling) 20° max. B. Closemount (standard ceiling only) IMPORTANT: If using the angle mount, ensure the ceiling angle is not steeper than 20°. *Helpful Hint: Downrod-style mounting is best suited for ceilings 8 ft.
-
Page 8: Downrod-Style Fan Mounting
INITIAL INSTALLATION 5. Remove motor screws/lock washers (N) from underside of motor housing (H) and save for blade arm (M) attachment later on. [If there are plastic motor blocks installed with the motor screws/lock washers (N), discard the plastic motor blocks.] For DOWNROD-STYLE FAN MOUNTING, Plastic Motor... - Page 9 DOWNROD-STYLE FAN MOUNTING 3. Slip downrod (C) into yoke, align holes and re-install pin (D) and clip (E). Tighten downrod set screws and then tighten nut. Set Screw and Nut Depending on the length of downrod you use, you may need to cut the lead wires back to simplify the wiring.
-
Page 10: Closemount-Style Fan Mounting
DOWNROD-STYLE FAN MOUNTING Install hanging ball of downrod (C) into opening of mounting bracket (A). Align slot in hanging ball with tab in mounting bracket (A). DANGER: Failure to align slot in the ball with the tab may result in serious injury or death. Continue to WIRING on page 11. -
Page 11: Wiring
CLOSEMOUNT-STYLE FAN MOUNTING Temporarily hang fan on the tab on the mounting bracket (A) using one of the non-slotted holes in the canopy (F). WIRING WARNING: To reduce the risk of fire, electrical shock or personal injury, wire connectors provided with this fan are designed to accept only one 12-gauge house wire and two lead wires from the fan. - Page 12 WIRING IMPORTANT: Make the necessary wiring Wire Connectors connections for remote control operation as detailed in Step 1b below. For each wire connection, use one of the wire connectors from the remote pack (G), making sure to screw wire connector on in a clockwise direction.
- Page 13 WIRING Wrap electrical tape (not included) around each individual wire connector (CC) down to the wire. WARNING: Make sure no bare wire or wire strands are visible after making connections. Place GREEN and WHITE connections on opposite side of the outlet box from the BLACK and BLUE (if applicable) connections.
-
Page 14: Final Installation
FINAL INSTALLATION Temporarily lift canopy (F) to mounting bracket (A) to determine which two canopy mounting screws/lock washers (B) in mounting bracket (A) Closemount Downrod align with slotted holes in canopy (F) and Option Option partially loosen these two canopy mounting screws/lock washers (B). - Page 15 FINAL INSTALLATION 3. Attach blade arms (M) to the bottom of motor housing (H) with motor screws/lock washers (N) previously removed (Step 5, page 8). Tighten motor screws/lock washers (N) securely. NOTE: Make sure to completely secure each blade arm (M) before proceeding to the next.
-
Page 16: Operating Instructions
FINAL INSTALLATION Remove socket rings (Q) from sockets on light kit fitter (I). Attach shades (P) to sockets, securing with socket rings (Q). WARNING: Do not overtighten socket rings (Q) as shades (P) may crack or break. Socket Install bulbs (J). WARNING: When replacing bulbs, allow bulb(s) and shade(s) to cool down before touching them. - Page 17 OPERATING INSTRUCTIONS CAUTION: The remote control transmitter can be programmed to multiple receivers or fans. If this is not desired, turn wall switch off to any other programmable receiver or fan. FCC Compliance Notice for Remote Control Modifications not approved by the party responsible for compliance could void the user's authority to operate the equipment.
- Page 18 OPERATING INSTRUCTIONS 3. Restore electrical power. IMPORTANT: To prevent damage to remote control transmitter, remove the battery if not used for long periods. Store the remote control transmitter away from excess heat or humidity. NOTE: If fan and/or remote control fail(s) to operate or you have purchased a new remote control transmitter, make sure to turn the power off first.
-
Page 19: Care And Maintenance
OPERATING INSTRUCTIONS In warmer weather, setting the reverse switch in the LEFT position will result in downward airflow creating a wind chill effect. In cooler weather, setting the reverse switch in the RIGHT position will result in upward airflow that can help move stagnant, hot air off the ceiling area. -
Page 20: Troubleshooting
TROUBLESHOOTING WARNING: Before beginning work, shut off the power supply to avoid electrical shock. PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Fan does 1. Turn power on or check fuse. 1. Power is off or fuse is blown. not move. 2. Turn power off. Loosen canopy and 2. -
Page 21: Limited Lifetime Warranty
LIMITED LIFETIME WARRANTY Set forth below, the manufacturer warrants the fan motor for this ceiling fan to be free from defects in workmanship and material for the life of the product. Also, subject to the limitations below, the manufacturer warrants all ceiling fan parts (“ceiling fan parts” excludes the motor and parts made in whole or in part with glass) to be free from defects in workmanship and material for a period of one year after the date of purchase by the original purchaser at retail.