Rack Mounting - Sony DVS-2000C Installation Manual

2-2-2, By7VIYb
DVS-2000CIZ, 194 v FBS vy ZICHMARA CHATAZC
LRMCRET, TMOERV—Wi, ATV avo I7z4
Yh Y—-WRMM-308 SHAUL T CREW,
(BETS b>
0 FV 7TIY b Y—IV(RMM-30)
Tory FeV —-W : 24
HY (BS X8) 8X
© RU (BVTIT4 X8)* 6K
e779 7T7Y HBAYREKSX16) 24%
e779 F77T9Y ERRNO Ye 34
(7 = — Bin Bs: 2-297-913-01)
(RRA tHE OIE)
(1) 194 VF BRED » 7 ICDVS-2000CH L UR MRE ZF
PLOY ELKLK A Fo PAOHELAEMILTA
ho, REIT YEROTISZIOLEBBOLET.
Fy FADE TOXLy bA10C~35 COMA CHEATS
ZEFRCHEBLTSY KE.
OQ) PYITTYEFSLS, DPHROV VES
CRW.
FIFE YIWMEWI CL
CIbEFITK
HeCSeMVKD, ERT.
(4) FY7V7IYbVY—WRMM-30K i, REY a 7 A
ABS HCW ETAS, DVS-2000C CHAT SZHEIL, —
BSRMM-300 V= 2 7 VIMAR LRESLO, KY
S27 VOPR TK RS,
22
2-2-2. RACK MOUNTING
DVS-2000C can be mounted in a standard 19 inch rack. Be
sure to use the optional rack mount rail RMM-30.
(Required Parts)
e Rack mount rail (RMM-30)
Rails with bracket > 2 pes
Screws (B 5x8) :8 pes
« Screws (BVTT 4x8)* : 6 pes
e Screws for rack mounting (RK 5x16) : 4 pes
e Omamental washers for rack mounting : 4 pcs
(Sony part number: 2-297-913-01)
*: DVS-2000C comes with the eight screws.
Use two of them for the spare parts.
(Cautions)
(1) If the DVS-2000C or a peripheral equipment is mounted:
in a 19 inch standard rack, it is recommended to install a
ventilation fan to prevent a temperature bring-up in the
rack. Make sure that ail the units in the rack can be
operated within the temperature range of 10 °C to 35 °C.
Be sure to use the recommended rail when rack
mounting. The unit cannot be installed completely to a
rack by rack angles alone.
(2
pews
It is recommended to fix the rack to the floor with bolts.
When the unit is pulled out from the rack, this will
prevent its fall. :
3
Dato]
(4
~—
An installation manual is packaged into the rack mount
rail RMM-30. However follow the instructions in this
manual. Because the rack mounting procedure of DVS-
2000C differs somewhat from the procedure explained
in RMM-30 installation manual.
DVS-2000C