Sony DVS-2000C Installation Manual page 93

AN
PIOFANES tHETSaS
(BKDS-20226878 BF DIE)
When adjust the analog input signal
(When using the BKDS-2022)
@ On the initial set-up screen, press the function keys in the
following order.
(INPUT) > (ADJUST)
The INPUT ADJUST menu is displayed.
INPUT BUTTON TYPE FORMAT GENLK PHASE
ADS 0 10 A-VID BCAMO SELF
CONCIECHECTIACIAG
Bo
@ Press an AUX bus button with pressing[F2] (BUTTON).
The selected FILL button number is displayed on the
sereen over [Fa]. The status of the analog input signal
assigned to that button is displayed on the screen over
[F3] through [F6]. The kind of input signal is indicated on
the screen over (TYPE)
A-VID : Analog video signal
A-KEY : Analog key signal
©. Press [F4] (FORMAT) to set the signal format.
Every time [F4]is pressed, the setting changes in the
following order.
ECAH CAME SHETE]
@ Press[F5](GENLK) to set the genlock mode. Every time
is pressed, the setting changes in the following order.
When the signal is analog video input, VIDEO mode
_ can not be selected.
piSeLE REF PLVbeo
® DEACEMLT, ADOHMBTMETS. GEIL)
2-42
SELF : When the signal is video input, the signal is
locked in the synchronized signal of Y signal.
REF : Because of not synchronized input signal, the
signal is locked in the external reference
synchronized signal.
VIDEO : Insofar as the signal is the key input, the sep
is locked in the synchronized signal of video
input that is input in pair.
® Tum the knob 6 to finely adjust the input H phase. (0 is
selected normally.)
DVS-2000C