Rack Mounting - Sony BVS-A3232 Maintenance Manual

1-8. Rack Mounting

1-8. Rack Mounting
c
BVS-A3232 can be mounted on an EIA Standard 19-inch
rack. Be sure to use the following rail kit.
Sony Rack Mount Rail
RMM-30
• Constituent parts
Rails with bracket
Screws (+PWH 4X 10)
Plate nut M4
Screw (+B 5X 8)
The maximum movable distance of the BVS-A3232 when mounted on a rack is as follows.
Height to the center of slide rail
Height of the unit when mounted in a rack
n
BVS-A3232 has the screw holes (M4) for feet mounting in
the bottom panel.
If mounting feet with screws, use the screws to satisfy the
following specification. If not, the BVS-A3232 may be
damaged.
• Screw protrusion : 5 mm or less from the surface of
(After mounting foot) bottom panel.
1-8(E)
1 set
2 pcs
2 pcs
2 pcs
8 pcs
Rail with bracket
n
Usable rack is shown below.
Racks having a depth of 660 to 830 mm
660-830 mm
Front
(26-33
Refer to the Installation Manual packed with the rack
mounting rail RMM-30 for details on how to install to the
rack mounting rail.
Maximum movable distance 581
Foot
Rear
)
3/4"
Unit: mm
5 mm or less
Bottom panel
Screw
BVS-A3232