Sony DVS-2000C Installation Manual page 105

IN
(19)DMET > 2—7it ACT SRE
AUXIS 2% ENBBZ 7 2 2 Y —(DME)NOVIDEOATI KC, AUX2
IS ARDMEOKEY AF (CEL, POSODMEWA LAT Y
FATE LCHBRL TVA. KROBNCCLORETTH
wit,
e DMEHLWA7U TF AF CRRENLBES. AUX1PAUK2
NADPOARAY bLEMOT, FU-EMHATS
PERPH DHEV DMERK
DMEIF 4 5
yey
® (DMEK)@## L &2°5, DMEKEYE 32°) Ftd 6
ATWAAUXNADEY Y EHT
2-54
(19) Set the DME Interface
This setting enables the following functions when the AUX 1
output is connected to the DME's'VIDEO input, and the AUX
2 output is connected to the DME's KEY input while the DME
output is connected to the switcher primary input.
e When the DME output is selected by the PROGRAM bus,
the tally is output in accordance with the crosspoint of
AUX1 and AUX2 bus.
e When the TRANSITION TYPE selects the DME button, the
DME WIPE transition can be executed.
@ On the initial set-up screen, press the function keys in
the following order.
(PERIPH) — [F2] (DMEIF)
The DME INTERFACE menu is displayed.
pee
@ Press the AUX bus button assigned to the DME VIDEO
signal with pressing (DMEV).
@® Press the AUX bus button assigned to the DME KEY
signal with pressing (DMEK).
DVS-2000C