Sony DVS-2000C Installation Manual page 103

INN
out XPT ---THRU
THRU 19 OFF
(17)Set the Synchronized Signal Change
+ OUTPUT--THRU
PGH Orr
ee iene
@ [F2] KPHEMLEROAUXNAWOBMT SKS vi
L, BETSPUARAY HRP YEBRTS.
BRENT OAKAY bRY VORA [F2] WH
RREND.
BRLAZUARAY ee Y ORE
[F3] OHM RASENS.
® [3] THRU) EL, AMES ORTRA Rou TRET
Bo
"HT 7% UION OFFI) BS.
ON : BRM ETT SLEV
OFF: MSS ZT 2S
@ Press [F2] (XPT) with pressing an AUX bus button to
select the output to be set.
The selected crosspoint button number is displayed on
the screen over [F2]. The setting of the selected
crosspoint button number is displayed on the screen
over [F3]
@ Press (OUTPUT) to select the output signal to be
set.
The output setting is displayed on the screen over [F5].
Every time is pressed, the output changes in the
following order.
rf EDPVWID-ASGNT A-ASGN AUT AUKE FAUXS F
2-52
® Press (THRU) to set the synchronized signal
change.
Every time is press, the setting changes between
ON and OFF.
ON: Not change the synchronized signal
OFF : Change the synchronized signal
The sync signal in the input signai is only passed.
through on the output signal if both input ( ) and
output ( ) settings are to ON.
DVS-2000C