Table of Contents
Advertisement
(6) AA-ACIMMCASCLEMBLKA.
FMA Cub
DLEAVBSIXHNLHOMNS.
HE?
Dey
heey FKAVILOTSZ
LSI
tb
597 PoWmMEEFMICISHTCE,
1) Fo FCIALLK.
ABRLLAYRKSX 16) 44 £ BY)
Ty YrMhehot.
ty
heF 7 7KHETS.
(Ao)
Outer member
Stopper
Inner member
Fig. 5
© DVS-2000CEFIYIVTIYbKLLECAORABH
BRL,
FROM) tT.
(5) Install the unit in the rack. Slide the inner members fully
into the outer members while pressing the stoppers of the
inner members. (Fig. 5)
(6) After making sure that the unit can be installed smoothly,
tighten the screws (B5x8) secured temporarily in step (4).
Pull out the unit about 20 cm (8 inches), and fasten the
screws of the front brackets to the rack.
—
After installing the unit in the rack, secure the unit to the
rack using four screws (RK5x16) and four ornamental
washers. (Fig. 6)
(7
DVS-2000C
©~ omamental washer ;
Fig. 6
screws (RIK5x16)
¢ When DVS-2000C is mounted in a rack, the maximum
travelling distance is illustrated below.
BABU
Maximum travelling distance
ROT
KL—N ev 2-ECOTE
Distance to the center of the slide rail
SyTTILbhBOty
hORS
Height of the unit mounted in a Rack
2-4
DVS-2000C
Advertisement
Table of Contents
