Royal Enfield CLASSIC 350 Owner's Manual page 87

WASHING PROCEDURE
AFTER WASHING
Ensure, the motorcycle is thoroughly dry by wiping

with a clean soft lint free absorbent cloth or
chamois leather.
Remove all adhesive tapes.

Lubricate control cables, pivots for footrest, side

stand, center stand, brake and gear shifter linkages,
drive chain etc. with lube oil.
Polish the painted and plated surfaces using

recommended automobile polishing wax.
Start the engine and allow to run at an idling speed

for a few minutes to warm up engine.
Drive the motorcycle slowly, apply both the brakes

intermittently to dry up the water in brake pads.
Royal Enfield All New Classic 350/Signals 350
85
Please clean/wipe out water spils completely inside

the RH side panel before keeping tool it, first aid kit
and other relevant documents inside the right side
panel.