Royal Enfield CLASSIC 350 Owner's Manual page 86

WASHING PROCEDURE
Use lukewarm water and mild detergent on the

painted components to remove dirt, etc.
Clean motorcycle thoroughly with plain water to

remove the detergent.
Never spray water towards bottom side of

instrument cluster directly to avoid water entry
through breather holes.
If possible, use compressed air and blow off water

particles from the obscure areas of the motorcycle,
electrical connections etc.
Once the motorcycle has been ridden in salty

conditions (i.e. during winter in places where road
salt is used) or near coastal areas it is recommended
to wash your motorcycle with cold water after the
ride to prevent corrosion or rust build-up. Please do
not use warm water for washing as it may damage
the motorcycle due to chemical reaction with the
salt. After washing process once the motorcycle
is completely dry it is recommended to apply anti
corrosion spray on all the metal and chrome plated
areas to protect the parts from corrosion.
It is recommended not to apply the anti-corrosion

spray on the brake discs.
Do not use

liquids to clean or wash on electronic parts.
The parts chosen using motorcycle configurator

should not be washed with soap or chemical, use
only with plain water.
Royal Enfield All New Classic 350/Signals 350
petrol, or other flammable
84