Download Print this page

DIODE LED OBD FLEX OPTICS Installation Manual

Advertisement

Quick Links

SAFETY & WARNINGS
1. Install in accordance with national and local electrical code regulations.
2. This product is intended to be installed and serviced by a qualified, licensed
electrician.
3. Do not modify product beyond instructions or warranty will be void.
4. Do not submerge, nor install within 5 feet of a swimming pool.
5. Only install with a compatible Listed Class 2 DC LED driver.
6. Do not exceed maximum run recommended for Tape Light.
7. Failure to follow safety warnings, and installation instructions will void the
warranty.
#
N
HANDLE WITH CARE
/A
Do not cover with any materials.
Do not fold, crease, or twist.
Installation Guide | OBD FLEX OPTICS | 2152024 | V0.1
TRUE
1
1
1 of 3
WARNING
Do not power while attached to
Do not allow product hang
unsupported during installation.
OBD FLEX OPTICS
Installation Guide
DO NOT CONNECT DIRECTLY TO LINE VOLTAGE POWER!
Read all warnings and installaion instructions thoroughly.
spool or tightly coiled.
Do not bend to a diameter less
than 5 inches.
Do not bend on a horizontal
plane.
Black
TRUE
Final
Diode LED
Color
Black
Diode L

Advertisement

loading
Need help?

Need help?

Do you have a question about the OBD FLEX OPTICS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for DIODE LED OBD FLEX OPTICS

  • Page 1 5 inches. Do not fold, crease, or twist. Do not allow product hang Do not bend on a horizontal unsupported during installation. plane. Installation Guide | OBD FLEX OPTICS | 2152024 | V0.1 TRUE 1 of 3...
  • Page 2 Diode SKU DI WPSL not included), and wet location end caps. Acidic-based adhesives may damage the phosphor of LED chips. 2. Adhere OBD Flex Optics to channel, working from one end to the other, being gentle with the LEDs. 3.2. 3M Adhesive 1.
  • Page 3 3.2. 2. Press channel onto mounting clips or aiming brackets until secured. 3. Adhere OBD Flex Optics to channel, working from one end to the other, being gentle with the LEDs. 4. Affix lens to top of channel. (optional) 5. Place end cap onto end of channel. (optional) System Diagrams Mount using included mounting clips/channels/screws.