Table of Contents
Advertisement
Quick Links
IP65
COLOR-CHANGING
SAFETY & WARNINGS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1. Install in accordance with national and local electrical code
regulations.
2. This product is intended to be installed and serviced by a
qualified, licensed electrician.
3. Do not modify or disassemble this product beyond instructions
or the warranty will be void.
4. Do not use if there is any damage to the fixture or wiring.
Inspect periodically.
5. Do not submerge Strip Light in liquids or use the product in
the vicinity of standing water or other liquids.
6. Do not install near areas with exposure to chlorinated water.
(Salt water environments are approved)
7. All plastics are affected by the elements and may shift in color
and other properties after product installation, particularly with
direct exposure to sun, chlorinated water, and other chemicals
8. Do not attempt to fix this product in the field.
9. Failure to follow safety warnings, and installation instructions
will void the warranty for this product.
RGB 24V LED Strip Light INSTALLATION GUIDE
NEON BLAZE
™
NEON BLAZE
®
24VDC
DRY/WET LOCATION
Side emitting
RGB 24V LED Strip Light
™
QUICK SPECS / MODELS
Input
Power
Ambient
Temp †
Environment Indoor/Outdoor/IP65
† Do not install product in environment outside
listed temperature.
*NOT FOR USE IN SUBMERSIBLE APPLICATIONS, OR
WITHIN 5 FEET OF A SWIMMING POOL.
1 OF 6
Installation GUIDE
24VDC Constant Voltage
4.4/ft
-4° - 122°F (-20° - 50°C)
IG041519-4.0
Advertisement
Table of Contents
Related Manuals for DIODE LED NEON BLAZE RGB 24V LED Strip Light
Summary of Contents for DIODE LED NEON BLAZE RGB 24V LED Strip Light
- Page 1 NEON BLAZE RGB 24V LED Strip Light ™ ® INSTALLATION GUIDE 24VDC IP65 COLOR-CHANGING DRY/WET LOCATION Side emitting QUICK SPECS / MODELS SAFETY & WARNINGS READ AND FOLLOW ALL SAFETY INSTRUCTIONS Input 24VDC Constant Voltage Power 4.4/ft 1. Install in accordance with national and local electrical code regulations.
- Page 2 NEON BLAZE RGB 24V LED Strip Light ™ INSTALLATION GUIDE REQUIRED TOOLS INSTALLATION TURN POWER OFF AT CIRCUIT BREAKER SHOCK HAZARD! May result in serious injury or death. Turn power OFF at circuit breaker prior to installation. 1. Phillips-head Screwdriver (Recommended) 2.
- Page 3 NEON BLAZE RGB 24V LED Strip Light ™ INSTALLATION GUIDE INSTALLATION (CONT.) Option B: Top U-Clips Place NEON BLAZE RGB LED Strip Light on surface, ™ MOUNT BLAZE NEON RGB LED ™ then place clear top u-clip over Strip Light. STRIP LIGHT Note: It is recommended to use two clear top u-clips for every foot of NEON BLAZE...
- Page 4 NEON BLAZE RGB 24V LED Strip Light ™ INSTALLATION GUIDE INSTALLATION (CONT.) ATTACH DRIVER AND LIGHTING CONTROL. NEON BLAZE RGB LED Strip Light may be bent to resemble ™ neon lighting. Examples below: Verify a compatible driver is installed. Utilize applicable wiring when installing outdoors.
- Page 5 NEON BLAZE RGB 24V LED Strip Light ™ INSTALLATION GUIDE SYSTEM DIAGRAMS The following diagrams are provided as example system designs. For information regarding larger systems or systems not pictured below, please see our web page or contact technical support. Always review each component installation guide for detailed and up-to-date wiring instructions.
- Page 6 NEON BLAZE RGB 24V LED Strip Light ™ INSTALLATION GUIDE VOLTAGE DROP CHARTS For best performance and lumen output, ensure proper wire gauge is installed to compensate for voltage drop of low voltage circuits. Example: 24V Voltage Drop & Wire Length Distance Chart Determine load size.
Need help?
Do you have a question about the NEON BLAZE RGB 24V LED Strip Light and is the answer not in the manual?
Questions and answers