Download
Share
Print this page
  1. Manuals
  2. Brands
  3. DIODE LED Manuals
  4. Lighting Equipment
  5. LINAIRE FLEX MICRO SIDE BEND
  6. Installation manual

DIODE LED LINAIRE FLEX MICRO SIDE BEND Installation Manual

Hide thumbs
1
2

Advertisement

Quick Links

Download this manual
SAFETY & WARNINGS
1. Install in accordance with national and local electrical code regulations.
2. This product is intended to be installed and serviced by a qualified, licensed
electrician.
3. Do not modify product beyond instructions or warranty will be void.
4. Do not submerge, nor install within 5 feet of a swimming pool.
5. Only install with a compatible Listed Class 2 DC LED driver.
6. Do not exceed maximum run recommended for Tape Light.
7. Failure to follow safety warnings, and installation instructions will void the
warranty.
#
R
HANDLE WITH CARE
E
F!
Do not cover with any materials.
Do not fold, crease, or twist.
Installation Guide | LINAIRE® FLEX MICRO SIDE BEND | 12182023 | V0.1
TRUE
1
1
1 of 2
WARNING
Do not power while attached to
Side Bend: Do not bend on a
LINAIRE® FLEX MICRO SIDE BEND
Installation Guide
DO NOT CONNECT DIRECTLY TO LINE VOLTAGE POWER!
Read all warnings and installaion instructions thoroughly.
spool or tightly coiled.
vertical plane.
Do not bend to a diameter less
than 5 inches.
Do not allow product hang
unsupported during installation.
Black
TRUE
Final
Diode LED
Color
Black

Advertisement

loading
Need help?

Need help?

Do you have a question about the LINAIRE FLEX MICRO SIDE BEND and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for DIODE LED LINAIRE FLEX MICRO SIDE BEND

Summary of Contents for DIODE LED LINAIRE FLEX MICRO SIDE BEND

  • Page 1 Black TRUE Final LINAIRE® FLEX MICRO SIDE BEND Installation Guide Diode LED Color Black SAFETY & WARNINGS 1. Install in accordance with national and local electrical code regulations. 2. This product is intended to be installed and serviced by a qualified, licensed electrician.
  • Page 2 LINAIRE® FLEX MICRO SIDE BEND Installation Guide #REF! 1. Turn Power Off at Circuit Breaker 4B. Mounting Bottom U Clip) Never cut product attached to a live circuit. Do not exceed Class 2 Limit. At least every 6 inches, fasten bottom u-clips to surface using mounting screws, then press LINAIRE into bottom u-clip.