Using the Built-in DC Light (for VM-D965LA)
Use the built-in DC light if you wish to shoot objects in dark places,
When the LIGHT switch is set to "
AUTO", the
tight turns on automatically when the camcorder
is
pointed
at
objects in a dark place and turns
off
when if is pointed at objects in a bright place,
CAUTION: Since the power consumption of the light is high, the camcorder operating time will decrease
even with a fully charged battery.
*| Make su «- thwaLuik cbm fed
bTT.tr
< pack is
attached.
9 Set the CAM /OFF /VIDEO switch to CAM and
then, set the LIGHT switch to AUTO when
required.
Note: When the LIGHT switch is set to ON, the
light will turn on whenever you make a record-
NOW
1
I
r
may not turn on ir
Note
Mi
>. i+
i
v.
n
i
utes with the LIGHT switch set to "AUTO" or
"ON", 'when the camcorder is in the record
pause mode, the camcorder and light will
automatically turn off. in such a case, turn the
camcorder on again.
Note i I
i
IGr
,
/
--st-
/
)'
)
ir
r
camcorder is pointed at a white subject with
high reflectivity in a dark place from a short dis¬
tance, the light may turn on or off, in this case,
set the LIGHT switch to ON.
Note
i
1 /
O
1
a
j
i c
review, even if you have manually turned on
Note
OFF/VIDE'
Note
i
C AUliON
r
it, otherwise
CAUTION
r
iiQnt wH©n carrying c
a rnalfi inction
*2 Vittrt a v v ss t the I iGH I switch to OFF or set the
CAM /OFF /VIDEO switch of the camcorder to
OFF position.
CAUTIONS:
•
During operation and/or after use of the
light, the front surface and lamp of the light
will be very hot. To avoid burns or hair dam¬
age, do not touch them with your hand.
•
When the light is on, do not allow water to
drop on the light.
•
When the light is on, avoid subjecting the
light to impacts or sharp vibrations.
•
Do not cover the light with paper or other
objects, since the air flow will be interrupt¬
ed, resulting in possible overheating haz¬
ard.
•
Never use the light in the vicinity of explos¬
ive or highly inflammable materials.
•
After using the light, cool the light section
sufficiently before storing the camcorder in
the case,
•
The lamp can only be replaced by a ser¬
vice engineer: if the lamp has blown, con-
suit your nearest service center,
VM-D965LA/VM-D865LA
E57