Table of Contents
Advertisement
: f*C©S r -
*-
-
-
/ou c an u: e the charged battery pack, AC adaptor (provided) or car battery cord (optional) tc c c
c
sorder. <\fter use, be sure to remove the power supply.
he
t 7,
■■cl v
Pack
T Attach the charged battery pack to the cam¬
corder. (See pages 17-18 for attachment and
charging of battery pack.)
Using the AC Adaptor
Please ensure that the CAM/OFF/VIDEO switch is in the OFF position whenever attaching or detaching
any power supply (ie. battery, AC adaptor, etc.).
"i
^'ie AC adaptor power cord into an AC
outlet. Make sure that the wide blade fits into
the wide slot. If it doesn't fit try reversing it. If
you still cannot make fit the blades fully into the
outlet either contact an electrician to replace
your obsolete outlet, or use a polarized cord or
outlet accessory.
2 C
nect the DC plug of the AC adaptor to the
* DC IN jack of the camcorder.
Note: The AC adaptor can be used around the
world. An AC plug adaptor is required in some
foreign countries. If you need one purchase it
at your Hitachi distributor.
AC Plug Adaptor
AC 200 - 240V
(not supplied)
The camcorder can be powered with a car battery by using an optional car battery cord (Hitachi VM-
CC80A KIT) to plug the camcorder into the car's cigarette lighter socket. Please ensure that the
CAM/OFF/VIDEO switch is in the OFF position whenever attaching or detaching any power supply (ie.
battery, AC adaptor, etc.).
Plug
the car battery cord into the car's cigarette
tj
Connect
one end of the DC cord (optional) to the
DC IN jack of
tire camcorder. Connect the other
end of the DC cord to the DC OUTPUT of the
Note: Only use the car battery cord 'with cars
having 12/24 volts negative ground system.
Note: You cannot use the car battery cord to
charge a battery.
Note: You need the optional VM-CC80A KIT,
HITACHI
Advertisement
Table of Contents
