Table of Contents
Advertisement
Loading Clock Battery
The clock battery backs up any information set in the camcorder: It allows the camcorder to retain the
date, ti me and any other settings when the power source is removed, it has a life scan of coma a year.
• Clock Battery
Install the battery to prevent misplacing it.
j|_ Open the clock battery cover.
3 Close the cover.
WARNING; KEEP THE BATTERY AWAY
FROM CHILDREN AND PETS.
IF SWALLOWED
CONSULT A PHYSICIAN IMMEDIATELY
FOR EMERGENCY TREATMENT.
WARNING; BATTERY MAY EXPLODE IF
NOT HANDLED PROPERLY. DO NOT
RECHARGE, DISASSEMBLE OR DISPOSE
OF IN FIRE.
Note:
Replace the battery with a Hitachi
Maxell, Sony, Panasonic, Sanyo or Toshiba bat¬
tery, part no. CR2025 only, Use of another bat¬
tery could lead to risk of fire or explosion.
Note: Dispose of battery safely in accordance
with local laws. Do not dispose of in fire.
Note; Do not short circuit the battery.
Note; Do not hold the battery with the metallic
tweezers.
Note: Keep the battery in a dark, cool, dry
place.
Using the Infrared Remote Control
installing the Remote Control Batteries
The remote control requires two "AA
"
batteries.
Slide the cover in the direction of the arrow to
remove it, and then insert the batteries. Be care¬
ful to install with correct polarity.
2 Re-attach the cover to the remote control.
Cautions on the batteries
* Do not use the old and new batteries at the same
time.
* Do not mix batteries of different types.
* Do not short, take apart or dispose of batteries by
throwing them into a fire.
* When liquid leaks, wipe it off completely and then
insert new batteries.
VM-D965LA/VM-D865LA
E13
Advertisement
Table of Contents
