Using Memory; Creating And Recording A Title - Hitachi Digital 8 VM-D965LA Instruction Manual

Using Memory
the linear time counter memory stops a rewinding tape at approximately "0:00:00M". This feature net
in locating a specific point in the tape to which you wish to return. An example might be that you ha'
recorded some tape that you have already watched, you continue recording but do not care
watch the tape you recorded earlier. The memory feature returns you to the beginning of the me
'1 Start recording or playback of a
cassette: 'Press
the COUNTER RESET button
on the remote
control at the point to which you
wish to return.
The
linear
time counter dears to
"0:00:00".
Press the STOP button to stop
playback, or press
the Start /Stop button recording and
set the
CAM/OFF/VIDEO switch to VIDEO.
re DISPLAY button on the remote
control
so the linear time counter with
memory
is dis¬
played as shown in the figure.
Mote: You can also use the memory function
by specifying "LCD/UNE" for the DISPLAY item
on the menu screen,
A
Press the REW button and the
tape stops at
approximately where you reset
the linear time
counter. This feature works in FF as well.
Note: If there is a no-signal recorded portion in
the middle of tape, or if the t.118 recorded por¬
tion and Digital 8 recorded portion are mixed
on tape, the memory stop function may not
Note: The memory function may not operate
with LP recorded tapes or tapes recorded in
the SP and LP modes mixed.
ssifczzi
mri
Creating and Recording a Title
The titling function allows you to select one of nine titles stored in camcorder memory, or <
title, and record it. You can choose from six languages to display stored titles: English, Fre
German, Italian and Chinese. Select or create a title and personalize your recordings,
same time keeping a permanent visual record of what is contained on a tape.
VM-D965LA/VM-D865LA
E45