Using Memory; Creating And Recording A Title - Hitachi VM-D975LA Instruction Manual

Using Memory
The iinear time counter memory stops a rewinding tape at approximately "0:00:00M ". This feature helps
In locating a specific point In the tape to which you wish to return. An example might be that you have
recorded some tape that you have already watched, you continue recording but do not care to
watch the tape you recorded earlier The memory feature returns you to the beginning of the most
recent recording.
"I Start recording or playback of a cassette. Press
the COUNTER RESET biitton on the remote
control at the point to mdiich you wish to return.
The iinear time counter dears to "0:00:00'''.
2 Press the STOP button to stop playback, or press
the Start/Stop button recording and set the
CAM/OFF/VIDEO switch to VIDEO.
^ Press the DISPLAY button on the remote control
so the iinear time counter with memory is dis¬
played as shown in the figure.
Note: You can also use the memory function
by specifying "LCD/LINE" for the DISPLAY item
on the menu screen,
^ Press the REW button and the tape stops at
approximateiv where you reset the linear time
counter. This feature works in FF as well,
Note: If there is a no-signa! recorded portion in
the middle of tape, or if the Hi8 recorclecl por¬
tion and Digital 8 recorded portion are mixed
on tape, the memory stop function may not
operate correctiy.
Note: The memory function may not operate
with LP recorded tapes or tapes recorded in
the SP and LP modes mixed,
Creating and Recording a Title
The fitiing function allov/s you to select one of nine titles stored in camcorder memory or create a new
title, and record It You can choose from six languages to display stored titles: English, French, Spanish,
German, itaflan and Chinese. Select or create a title and persanalize your recordings, while at the
same time keeping a permanent visual record of what is contained on a tape.
¥M-D975LA/¥M-D875iA/¥M~0873LA
E45