Simple Maintenance; Replacing Oven Lights - Bertazzoni Professional Series Installation, User And Maintenance Manual

SIMPLE MAINTENANCE

Keeping appliance area clear and free from combustible
materials, gasoline and other flammable vapors or liquids.
Not obstructing the flow of combustion and ventilation air.
These simple tasks can be performed by the owner. For
any other maintenance task, we recommend employing a
trained service technician. Please call our toll free line to
identify service technicians in your area:
If located in the US, BC, B, Sk and MB
866 905 0010
https://us.bertazzoni.com/more/support
If located in CANADA, ON, QC, PE, NU, NS, NL, NB
800 561 7265
https://ca.bertazzoni.com/more/support

REPLACING OVEN LIGHTS

WARNING
Electric shock hazard!
Disconnect the electric power at the main
fuse or circuit breaker before replacing bulb.
DO NOT touch bulb with bare hands. Clean
off any signs of oil from the bulb and handle
with a soft cloth.
SIDE OVEN LIGHT
Bulb type: halogen G9 120 V, 40 W
• Make sure the heating elements are turned off and
allowed to cool completely. Disconnect the appliance
from the power supply. Remove the oven rack if it
interferes with the light housing.
• Slide the tip of a flat screw driver between the glass
cover and the lamp housing. Gently twist the screw
driver tip to loosen the glass lens cover, holding it in
place with your fingers to prevent it from falling and
breaking.
• Remove the glass lens cover and then remove the
halogen bulb.
40
• Place a new halogen bulb in its slot. DO NOT touch bulb
with bare hands.
• Press the glass cover back into place and replace the
oven rack.
• Reconnect the oven to the electrical supply.
Fig. 31
Fig. 32