Table of Contents
Advertisement
INSTALLING THE ANTI/TIP DEVICES
ANTI-TIP BRACKETS
The anti-tip bracket shipped with the range must be
properly secured to the rear wall as shown in the picture
below.
The height of the bracket from the floor must be determined
after the range legs have been adjusted to the desired
height and after the range has been levelled.
•
Measure the distance from the floor to the bottom of the
anti-tip bracket receptacle on the back of the appliance.
•
Position the anti-tip brackets on the wall at the desired
height plus 1/8" (0.32 cm). The brackets must be placed
at 2"5/16 (6.0 cm) from the side of the range.
•
Secure the brackets to the wall with appropriate
hardware.
•
Slide the range against the wall until the brackets are
fully inserted into their receptacles on the back of the
range.
ANTI/TILT CHAIN
The anti-tilt chain shall be installed on right or left side
alternatively according below instructions. The chain shall
be hand pulled and fixed to open hook through closed ring.
Disengage the chain prior to moving the appliance for
service.
CAUTION
Once
servicing
completed the anti-tilt devices (brackets
and chain) shall be re-engaged according
above instruction/installations.
22
Fig. 19
operation
have
been
A
•
A CLOSED RING
•
B OPEN HOOK
Fig. 20
Fig. 21
B
Fig. 22
Advertisement
Table of Contents
