Table of Contents
Advertisement
ELECTRIC OVEN
BEFORE SELF CLEANING THE OVEN
Wipe out large spillages, grease and any loose soil that can
be easily removed. Remove any soil that is outside the
door seal area. This appliance is designed to clean the
oven interior and the portion of the door that faces the oven
cavity. The outer edges of the door and the oven cavity are
not in the cleaning zone. Wipe this area clean before
starting the self-cleaning cycle.
Remove all utensils and racks.
Make sure the light bulbs and glass covers are in place.
Turn on the ventilator hood above the range and leave it on
until the self-clean cycle is completed (red indicator light
turning off).
Remove racks
1) Locate the two hooks at the bottom of the rack and
gently pull down contemporary the two hooks.
2) Pull the rack away from the oven side and remove
pulling up the upper hooks of the racks from the side of
the oven.
3) Remove the rack from the oven. Insert the probe closing
cap into the port located in the upper left side of the oven
cavity.
DOOR LOCK
When the CLEAN cycle starts, the automatic door lock
cycle begins. Check the door to confirm that it is locked.
You can stop the self-cleaning cycle by turning the function
selector to the OFF position.
1
NOTE
Fig. 29
Make sure that the oven door is locked at
the beginning of the self-cleaning cycle.
2
Fig. 30
3
Fig. 31
41
Advertisement
Table of Contents
