Subscribe to Our Youtube Channel
Related Manuals for Lincoln SKF C Series
Summary of Contents for Lincoln SKF C Series
- Page 1 User and maintenance instructions Air operated ejector Model , series “C” Date of issue October Form number Version ...
- Page 2 Contents Declaration of Incorporation* .. U.K. Declaration of Incorporation* . . . Safety* .........
- Page 3 I, the undersigned of Lincoln Industrial Corporation, do hereby declare that the equipment specified above, in its intended use, conforms to the requirements of the above EC Directive(s). ___________________________________...
- Page 4 I, the undersigned of Lincoln Industrial Corporation, hereby declare that the equipment specified above, in its intended use, conforms with the Essential Health and Safety Requirements of U.K. legislation Supply of Machinery (Safety) Regulations No. Annex I, Declaration of Incorporation by the time of placing it on the market.
-
Page 5: Explanation Of Signal Words For Safety
Safety* Explanation of signal WARNING words for safety Do not allow any body part to be trapped by equipment. The assembly must be installed, maintained Body parts can be crushed and repaired exclusively by persons familiar by subassemblies during with the instructions. - Page 6 Owner/operator Model : Used specifically with petro- WARNING leum based materials. manual Always read and follow the fluid and solvent manufacturer’s recommenda- tions regarding the use of protective WARNING It is the responsibility of the owner/operator Always check equipment for proper clothing and equipment.
-
Page 7: Adjustment Procedure
Service and Ejector operation NOTE disassembly As the air cylinder reaches the top of its A -way valve with in. NPTF ports should stroke along with the ejector piston the procedure be connected to the inlet and outlet of the air material inlet port of the ejector opens cylinder. - Page 8 Dimensions and parts 2 / in. / in. NPTF (57,1 mm) Air inlet Part of 11 15 16 (100 mm) / in. NPTF 10 / in. Air inlet (266,7 mm) maximum 9 / in. (241,3 mm) minimum Torque to 37 to 41 in.lbf. (50 to 55 Nm) 11 / in.
- Page 9 Service parts Item Description Part number Quantity Item Description Part number Quantity U-cup packing (Buna-N) Cap screw Spring retainer nut Plunger assembly Spring Adjusting screw adapter ...
- Page 10 This page left intentionally blank. ...
- Page 11 This page left intentionally blank. ...
-
Page 12: Warranty
® SKF and Lincoln are registered trademarks of the SKF Group. © SKF Group The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein.
Need help?
Do you have a question about the SKF C Series and is the answer not in the manual?
Questions and answers