Table of Contents
Advertisement
28
C
HAPTER
9 Remove the EtherDisk diskette from drive A, and
then click Yes.
You must reboot your PC to complete the installation.
After Windows restarts, you're prompted for your user
name and password.
10 Enter your user name and password, and then
click OK.
The driver installation is complete. To confirm successful
installation, go to "Verifying Successful Installation" later in
this chapter.
Windows 98
To install the network driver in a PC running Windows 98:
1 Make sure that the NIC is installed in your PC and that
it's connected to the network, as described in Chapter 2.
2 Turn on the power to the PC.
Windows 98 detects the NIC. The Add New Hardware
Wizard (Figure 7) starts.
Figure 7 Add New Hardware Wizard
3: I
N
NSTALLING THE
D
ETWORK
RIVER
Advertisement
Table of Contents
