Table of Contents
Advertisement
Windows NT 4.0
To remove NIC software in a PC running Windows NT 4.0:
1 Double-click the My Computer icon, then the
Control Panel icon, and then the Network icon.
The Network screen appears.
2 Click the Adapters tab.
3 Select the name of the NIC in the Network Adapters
box, and then click Remove.
4 Click Yes to confirm the removal.
5 Click Close to close the Network screen.
The NIC driver and diagnostic software are removed from
the PC.
You're prompted to restart the PC.
Windows NT 3.51
To remove NIC software in a PC running Windows NT 3.51:
1 In the Main Program window, double-click
the Control Panel icon, and then the Network icon.
The Network Settings window is displayed.
2 In the Installed Adapter Cards panel, select the name
of the installed NIC and click Remove.
The Network Settings window displays a warning message.
3 Click Yes.
The Network Settings window is displayed again. The NIC
no longer appears in the Installed Adapter Cards panel.
If you're physically removing the NIC from the PC,
click No. Don't restart the PC until you shut down the
system, turn the power off, and remove the NIC from
the PC.
If you're reinstalling the NIC software, click Yes to
restart the PC.
Removing NIC Software
47
Advertisement
Table of Contents
