Speakers
Table 5-13
Speaker description and part number
Description
Speaker Kit (includes speaker tape)
NOTE:
Speaker tape is included in the Miscellaneous Parts Kit, spare part number L50831-001.
Before removing the speakers, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Remove the battery (see
4.
Remove the fan (see
5.
Remove the display (see
6.
Remove the system board (see
Remove the speakers:
1.
Remove the two Phillips M2.0 × 3.0 screws (1) that secure the left speaker to the computer.
2.
Remove the left speaker from the computer (2).
3.
Remove the speaker cable from the clips (3), and then remove the right speaker from the computer (4).
Reverse this procedure to install the speakers.
40
Chapter 5 Removal and replacement procedures for authorized service providers
(Preparation for disassembly on page
Computer feet and bottom cover on page
Battery on page
22).
Fan on page
25).
Display assembly on page
System board on page
20).
30).
36).
Spare part number
L36896-001
20).