Image Tilt Correction; Adding Channels To The Tv's Memory - Toshiba FSTPURE 26HF84 Owner's Manual

÷
÷
mage timt correction
When you install or change the direction of the TV, the picture may
become tilted (caused by the Earth's magnetism). If this happens, use
the image tilt correction feature to obtain the best possible picture.
To adjust the image tilt:
1. Press MENU, then press 4 or
until the SETUP menu appears.
2. Press _ or V to highlight IMAGE
TILT.
3. Press _ or _ to adiust the picture
tilt (from -10 to +10).
szacu_
CLOSED C_TUON OF_
_UCTU_e SUZE _
PUCTU_E SCROLL
CUNEMA MODE VUDEO
,_t ,SELECT _ ,AB Jt_T
Adding channels to the TV's memory
Your TV will stop on specific channels that are stored in the TV's
channel memory when you press Channei _, or V. Use the steps
below to set alI active channels in your area automatically.
Programming channels automatically
"YourTV can automaticaiIy detect aII active channels and store them in
its memory. After the TV has stored the channels in its memory auto-
maticaliy, you can add or erase channels manually.
To add channels automatically:
1. Press MENU, then press _ or _ to display the SETUP menu.
2. Press _ or _ until the TV/CABLE
seiection is higMighted.
3. Press _ or _ to highIight either
TV or CABLE, depending on
which you use.
If you use an antenna, choose TV.
If you use cabte, choose CABLE.
s_rup
LANGUA_ ENgLiSH
c_[ PR_eRAM
_B / _aAS_ AB_
't
_E_ , _LECT ,_:ADJ USer
4. Press _ until the CH PROGRAM seIection is highlighted.
5. Press _ or _ to start channel programming. The TV will automatically
cycle through all the TV or Cable channels (depending on which you
selected), and store all active channels in the channel memory.
While the TV is cycling through the channels, the message
"PROGRAMMING NOW-PLEASE WAIT" appears.
6. When channel programming is complete, the message "COMPLETED"
appears.
7. Press CH ,& or _ to view the programmed channels.
Adding and erasing channels manually
After you have programmed the channels automatically, you can add or
erase specific channels manually.
To add or erase channels manually:
1. Select the channel you want to add or erase. If adding channels, you
must select the channel to add using
the Channel Number buttons.
2. Press MENU, then press _ or _ to
display the SETUP menu.
3. Press _, or _ to highlight ADD/
ERAS E. ,_, ......
4. Press _ or _ to select ADD or
SETUP
TV_AB_E TV
_b ,S_LECT
ERASE, whichever function you want to perform.
5. Repeat steps 1-4 for other channels you want to add or erase.
-- Menu
-- Channel _._
÷
3R40121A/E P16-23 22
÷
6/7/04, 18:57