Adding And Erasing Channels Manually; Changing Channels; Image Tilt Correction - Toshiba 36AF12 Owner's Manual

Adding and erasing channels manually

After you have automatically programmed the channels into the TV's
memory, you can manually add and erase individual channels.
To add a channel to or erase a channel from the TV's memory:
1. Tune the TV to the channel you want to add or erase. If you are
adding a channel, you will need to use the CHANNEL
NUMBERS to select the channel.
2. Press MENU.
3. Press or to highlight the SET UP menu.
x •
4. Press or to highlight ADD/ERASE.
y z
SET UP
LANGUAGE:
[ENGLISH] FRANCAIS ESPANOL
ANT1/2: [ANT1] ANT2
TV/CABLE: [TV] CABLE
CH PROGRAM
ADD/ERASE: [ADD] ERASE
MORE
[ ] SELECT [ ]
MOVE
5. Press or to select ADD or ERASE, whichever function you
x •
want to perform.
6. Press MENU.
7. Repeat steps 1–6 for other channels you want to add or erase,
or press EXIT to return to normal TV viewing.

Changing channels

To change to the next programmed channel:
Press CHANNEL .
y z
To change to a specific channel (programmed or unprogrammed):
Press the CHANNEL NUMBERS (0–9 and 100).
Note: For channels 100 and higher, press the 100 button, and
then the next two channel numbers (for example, to select
channel 100, press 100, 0, 0; to select channel 125, press
100, 2, 5).

Image tilt correction

When you install or change the direction of the TV, the picture may
become tilted (caused by the Earth's magnetism). If this happens, use
the image tilt correction feature to obtain the best possible picture.
To adjust the image tilt:
1. Press MENU, and then press
appears.
2. Press or to highlight TILT CORRECTION.
y z
3. Press or to adjust the picture tilt (from –10 to +10).
x •
SET UP
MORE
DEMO [START] STOP
IMAGE TILT +3
– +
MOVE [ ] SELECT [ ]
or until the SET UP menu
x •
18
Channel
DEMO MENU TV/VIDEO VOLUME CHANNEL
Menu
LIGHT RECALL POWER
TV
CABLE
MUTE TV/VIDEO TIMER
VCR
2
1 3
CH CH (Channel)
4 5 6
Channel
Numbers
8 9
7
VOL
CH RTN
100
0 ENT
ADV/
PIP CH MENU
FAV
ENTER FAV
EXIT
ADV/
PIP CH
POWER