Table of Contents
Advertisement
Image tilt correction
When you install or change the direction of the TV, the picture may
become tilted (caused by the Earth's magnetism). If this happens, use
the image tilt correction feature to obtain the best possible picture.
To adjust the image tilt:
1. Press MENU, then press
until the SETUP menu appears.
2. Press
or
to highlight IMAGE
TILT.
3. Press
or
to adjust the picture
tilt (from –10 to +10).
Adding channels to the TV's memory
When you press CH
you have stored in the TV's channel memory. Follow the steps below to
program channels into the channel memory.
Programming channels automatically
Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory auto-
matically, you can add or erase channels manually.
To add channels automatically:
1. Press MENU, then press
2. Press
or
until the TV/CABLE
selection is highlighted.
3. Press
or
to highlight either
TV or CABLE, depending on
which you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
4. Press
until the CH PROGRAM selection is highlighted.
5. Press
or
to start channel programming. The TV will automatically
cycle through all the TV or Cable channels (depending on which you
selected), and store all active channels in the channel memory.
While the TV is cycling through the channels, the message
"PROGRAMMING NOW-PLEASE WAIT" appears.
6. When channel programming is complete, the message "COMPLETED"
appears.
7. Press CH
or
to view the programmed channels.
Adding and erasing channels manually
After you have programmed the channels automatically, you can add or
erase specific channels manually.
To add or erase channels manually:
1. Select the channel you want to add or erase. If adding channels, you
must select the channel to add using
the Channel Number buttons.
2. Press MENU, then press
display the SETUP menu.
3. Press
or
to highlight ADD/
ERASE.
4. Press
or
to select ADD or
ERASE, whichever function you want to perform.
5. Repeat steps 1-4 for other channels you want to add or erase.
3R40321A/E P24-26
25
or
or
, your TV will stop only on the channels
or
to display the SETUP menu.
or
to
25
9/7/04, 15:07
Menu
Channel
Advertisement
Table of Contents
