Using The Locks Menu; Selecting A Password - Toshiba FSTPURE 26HF84 Owner's Manual

÷
÷
To c(ear your favorite channels:
1= Select a channeI you want to c(ear.
2. Press MENU, then press 4 or _ to display the OPTION menu.
3. Press _ or V to highlight FAVORFE CH.
4. Press 4 or _ to display the FAVORITE CH menu. SET/CLEAR will
be highlighted.
5. Press 4 or _ to highlight CLEAR.
_ ;;;;;;;;;;;;;;;;;;;;;;;; [ [ [,
S_TU_ CH 002 O O O
O O O 0
_rv CABLE O O O 0
_,:ADJUST SET :ENTE_
EN_,E×UT
6= Press ENTER unti( "0" replaces the channel number you want to
erase.
7. Press EXIT to return to normal viewing.
8= Repeat steps 1-6 for the other channels.
Using the LOCKS menu
The V-CHp feature is avai(abme onmy for the U.S. V-Chip system.
The Canadian V-ehip system is not supported.
'You can prevent others from viewing certain programs or channels by
blocking them using the V-Chip feature.
Selecting a password
Before you can block programs and channels, you must seiect a
password. The password you select prevents others from changing the
rating ((mits you set.
To so(oct your password and access the LOCKS menu:
1. Press MENU, then press ._ or _. to highlight the LOCKS menu.
2. Press A or V to display the password entering mode.
LOCKS
SELECT:[O=_] SET ,ENTER
ENO,E×UT
3= Use the Channel Number buttons (0-9) to enter your password.
If you are accessing the V-Chip menus for the first time, select a
four-digit number to be your password. Press ENTER.
LOCKS
_ELECT:[O=_ SET ,ENTER
END,E×UT
Menu/
Enter
Exit
Note:
The password you programmed is also used in
the LOCKS menu; see pages 26-28.
Channel
Numbers
Menu/
Enter
AV_
÷
4. Enter the same password for safety, then press ENTER.
The LOCKS menu appears.
3R40121A/E P24-30 24
÷
6/7/04,19:20