Video) And A Vcr - Toshiba FSTPURE 26HF84 Owner's Manual

÷
÷
Connecting a DTV receiver / set-top box with
ColorStream ®(component video) and a VCR
This connection allows you to watch DTV (digital TV), VCR, and TV
programs, and record DTV and TV programs.
Your TV has CotorStream _ (component video) inputs. Connecting your
TV to a DTV receiver with component video inputs can greatly enhance
picture quality and realism.
From Antenna
Stereo VCR
TV
From DTV
Antenna
You wilI need:
• three coaxial cables
• two sets of standard A/V cables
• one pair of audio cables
• one set of component video cables
Note:
For the highest possible picture quafity, use
component video cables between TV and
DTV receiver. You can connect the compo-
nent video cables to either set of CoforStream
jacks on the TV (HD-1 or HD-2).
The CotorStream HD-1 and HD-2 jacks can
be used with Progressive (480p, 720p) and
Interlaced (480L 1080i) scan systems. A
1080i signal wifl provide the best picture
performance.
If your DTV receiver does not have compo-
nent video, use the S-video and standard
audio connections instead. Do not connect
both an S-video and a standard video cable
to V/DE01 (or V/DE02) at the same time or
the picture performance wilt be unacceptable.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subiect you to
civil and criminal liability.
tlii!i
÷
DTV Receiver
with Co_orStream '_
11
3R40121A/E P07-15
÷
6/7/04, 18:57