Osd Language; Setting The Screen Saver - Yamaha DV-S6160 Owner's Manual

2
Press ENTER.
➜ The input menu appears on the TV
screen.
PROGRAM: TRACK (01-17)
1 04
2 10
3 _ _
4 _ _
5 _ _
EXIT
■ To input your favorite tracks/
chapters
3
Use the numeric buttons (0-9) to enter a
valid track/chapter number.
4
Use 2 / 3/5/a to move the cursor to the
next position.
• If the track/chapter number is more
than ten, press 33
page, and then proceed with
programming.
Use 2 / 3/5/a to highlight [NEXT]
•
on the program menu, and then press
ENTER.
5
Repeat steps 3-4 to input another track/
chapter number.
■ To remove a track
6 Use 2 / 3/5/a to move the cursor to the
track you want to remove.
7
Press ENTER to remove this track from
the program menu.
6 _ _
7 _ _
8 _ _
9 _ _
10 _ _
START NEXT
to move to the next
l
OR
■ To start program playback
8
Use 2 / 3/5/a to highlight [START] on
the program menu, and then press
ENTER.
➜ Playback starts for the selected tracks in
the programmed sequence.
■ To exit from program playback
9
Use 2 / 3/5/a to highlight [EXIT] on
the program menu, and then press
ENTER.

OSD language

This menu contains various options for the on-
screen display (OSD) language. For details,
see "Setting the OSD Language" on page 14.

Setting the screen saver

This function is used to turn on or off the
screen saver.
1
In "GENERAL SETUP PAGE", press
5/a to highlight [SCREEN SAVER], and
then press 3.
ON
Select this to turn off the TV screen when disc
playback is stopped or paused for more than
15 minutes.
OFF
Select this to disable the screen saver function.
2
Press 5/a to select a setting, and then
press ENTER.
Setup Menu
23
En