Setting Language Preference; Setting The Osd Language - Yamaha DVD-S657 Owner's Manual

4 Press .... to highlight one of the options
below:
PAL
Select this if the connected TV is PAL
system. It will change the video signal of an
NTSC disc and output in PAL format.
NTSC
Select this if the connected TV is NTSC
system. It will change the video signal of a
PAL disc and output in NTSC format.
MULTI
Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
S Select an item and press ENTER/OK.
Notes:
- Before changing the current
TV
Standard
setting, ensure that your
TV
supports the
'selected
TV
Type' system.
- If there is not a proper picture
on
your
TV,
wait for 15 seconds for auto recover.
Getting Started
You can select your own preferred
language settings.This DVD Player will
automatically switch to the language for
you whenever you load a disc. If the
language selected is not available on the
disc, the disc's default language will be used
instead. The OSD language in the system
menu will remain once selected.
Setting the OSD Language
1 Press SETUP.
2 Press
~ ~
to select [GENERAL SETUP
PAGE].
3 Press .... to highlight [OSD LANGUAGE],
then
press~.
4 Press .... to select a language and press
ENTER/OK.
11
4 Press .... to highlight one of the options
below:
PAL
Select this if the connected TV is PAL
system. It will change the video signal of an
NTSC disc and output in PAL format.
NTSC
Select this if the connected TV is NTSC
system. It will change the video signal of a
PAL disc and output in NTSC format.
MULTI
Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
S Select an item and press ENTER/OK.
Notes:
- Before changing the current
TV
Standard
setting, ensure that your
TV
supports the
'selected
TV
Type' system.
- If there is not a proper picture
on
your
TV,
wait for 15 seconds for auto recover.
Getting Started
You can select your own preferred
language settings.This DVD Player will
automatically switch to the language for
you whenever you load a disc. If the
language selected is not available on the
disc, the disc's default language will be used
instead. The OSD language in the system
menu will remain once selected.
Setting the OSD Language
1 Press SETUP.
2 Press
~ ~
to select [GENERAL SETUP
PAGE].
3 Press .... to highlight [OSD LANGUAGE],
then
press~.
4 Press .... to select a language and press
ENTER/OK.
11