Table of Contents
Advertisement
General Notes on connections
Depending on the equipment you wish to
connect, there are various ways you could
connect this unit. Possible connections are shown
in the following drawings.
Please refer to the manuals of other equipment
as necessary to make the best connections.
Do not connect this unit via your VCR. The video
quality could be distorted by the copy
protection system.
Do not connect this unit's audio out jack to the
phono in jack of your audio system.
Digital Connections
This unit has COAXIAL and OPTICAL digital
out jacks. Connect one or both of them to your
AV receiver equipped with Dolby digital, DTS, or
MPEG decoder using each specific cable
(separate purchase).
AV receiver
Center speaker
Left main
speaker
Left rear
speaker
You will need to set this unit's digital
output to ALL (see 'User Preference
Settings').
1
2
COAXIAL
OPTICAL
R
PCM
DIGITAL
DTS MPEG
AUDIO OUT
C
O
COAXIAL
OPTICAL
IN
IN
Subwoofer
Right main
speaker
Right rear
speaker
Note:
– If the audio format of the digital output does
not match the capabilities of your receiver, the
receiver will produce a strong, distorted sound or no
sound at all. Make sure to select the appropriate
audio format at menu screen included on the disc.
Pressing AUDIO once or more may change not only
audio languages but also audio formats, and the
selected format appears for several seconds on the
status window.
– MP3 Audio is not available on the Digital
Output.
Analog Connections
Use audio/video cable supplied with this unit to
connect AUDIO OUT L (left) and R (right) jacks
of this unit to corresponding input jacks of your
audio equipment such as Stereo amplifier. You
can connect a subwoofer to this unit's
SUBWOOFER jack.
COAXIAL
OPTICAL
PCM
DIGITAL
DTS MPEG
AUDIO OUT
(supplied)
Stereo
amprifier
Left
Right
speaker
speaker
Preparation
1
VIDEO
2
R
L
SUBWOOFER
S VIDEO
VIDEO OUT
R
L
Subwoofer
R
L
1 CD/DVD
R
L
5
Advertisement
Table of Contents
