Advanced Energy ARTESYN Power Management Controller Manual page 9

1OU OCP Power Management Controller (PMC)
MECHANICAL DRAWING
RJ45 Connector
The MPN is TE 2041276-2 or equivalent. The connectors come with spring fingers. They must contact the chassis in order to provide good EMI
sealing. The reserved port 2# and 4# should be plugged with a connector cap.
Blind Mate
The PCB (card edge) of the PMC module plugs into a 2C connector on the chassis side. This connector should be a TE Sliver 2.0 Straddle Mount cable
or PCB-mounted connector, TE 2340326-1 or equivalent, and can be customized for the particular power shelf.
advancedenergy.com 9