CHAINTECH 9BJF2 User Manual page 25

User's Manual
AC97 Modem
Select Enabled if you install the soft modem riser card.
Onboard CMedia Audio
This feature allows user to select 6 channels function, if they installed an optional
6ch Expansion kit on this mainboard.
C. Super IO Device
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC) installed on the
system board and you wish to use it. If you install an add-in FDC or the system
has no floppy drive, select Disabled in this field.
COM2 Select
This function allows you to select an operating mode for the second serial port.
(Standard RS-232C serial port/IrDA/ASKIR/SCR infrared port)
Onboard Parallel Port
Select a logical LPT port address and corresponding interrupt for the physical
parallel port.
D. USB Controller
Enable the on-board Universal Serial Bus (USB) controller if you want to connect
a USB keyboard to your system. Note that if this setting is disabled, you can
still temporarily use a USB keyboard during bootup so that you can enter BIOS
and enable this setting. If you pass the bootup stage without enabling this
function, your PS/2 keyboard will no longer work.
E. USB Keyboard Support
If your current operating system doesn't support USB drivers (i.e., DOS) this
function must be enabled for USB keyboard operation in these operating systems.
F. Init Display First
This function allows user to choose between Onboard or AGP slot to initialise
display first .
20