Chapter 2
WOL (Wake-on-LAN) Connector (CN5)
Enable the Wake Up On LAN selection in BIOS's
Power Management Menu to use this function. The
capability to remotely manage PCs on a network is a
significant factor in reducing administrative and
ownership costs. Magic Packet technology is designed
to give WOL capability to the LAN controller. This
header is used to connect an add-in NIC (Network
Interface Card) which gives WOL capability to the
mainboard.
WOM (Wake-on-Modem) Connector (CN5A)
Enable the Wake Up On Modem selection in BIOS's
Power Management Menu to use this function. This
header is used to connect an add-in modem card which
gives WOM capability to the mainboard.
Smart Card Reader Connector (CN7)
This connector must be connected to an optional
Smart card reader or Chaintech (CBOX 2) composite
front I/O panel.
Blue LED Connector(CN17)
This feature work entirely the same as the power indicator
LED, both shows the system's power status. The only
difference is that this one is blue while the other is red
LED.
USB 0/1 Ports and USB 2/3 & 4/5 Connectors (USB1/CN23/CN23A)
If you want to use a USB Keyboard, you must enable
the USB keyboard support function in BIOS's
Integrated Peripherals menu (See Section 3-4). This
board contains a USB Host controller and includes
a root hub with two USB 0/1 ports a connector for
optional USB Adaptors (USB 2/3 and 4/5).
10
Need help?
Do you have a question about the 9BJF2 and is the answer not in the manual?