Table of Contents
Advertisement
S
M
Set Mode Item 65 TEMP
Function: Indicates indicate the current temperature inside the transceiver's case and se-
lects the measurement units ("°F" or "°C") for the temperature sensor.
Set Mode Item 66 TN FRQ
Function: Setting of the CTCSS Tone Fre-
quency.
Available Values: 50 standard CTCSS tones
Default: 100.0 Hz
Set Mode Item 67 TOT
Function: Setting of the TOT time
Available Values: OFF/1MIN/3MIN/5MIN/
10MIN
Default: 3MIN
The time-out timer shuts off the transmitter after continuous transmission of the programmed
time.
Set Mode Item 68 TS MUT
Function: Enables/Disables the receiver audio output while the Tone Serch Scanner is
activated.
Available Values: OFF/ON
Default: ON
Set Mode Item 69 TS SPD
Function: Selects the Tone Serch Scanner speed.
Available Values: FAST (2.5 tone/sec)/SLOW (1.25 tone/sec)
Default: FAST
Set Mode Item 70 TXSAVE
Function: Enables/Disables the Transmitter Battery Saver.
Available Values: OFF/ON
Default: OFF
Set Mode Item 71 VFO MD
Function: Enables or disables the VFO band edge limiting for the current band.
Available Values: BAND/ALL
Default: BAND
BAND: When the VFO frequency reaches the high band edge of the current band, the
VFO frequency will jump to the low band edge of the current band (or vice versa).
ALL:
When the VFO frequency reaches the high edge of the current band, the VFO
frequency will jump to the low band edge of the next band (or vice versa).
102
M
CTCSS TONE FREQUENCY ( Hz )
67.0
69.3
71.9
82.5
85.4
88.5
100.0 103.5 107.2
123.0 127.3 131.8 136.5 141.3 146.2
151.4 156.7 159.8 162.2 165.5 167.9
171.3 173.8 177.3 179.9 183.5 186.2
189.9 192.8 196.6 199.5 203.5 206.5
210.7 218.1 225.7 229.1 233.6 241.8
250.3 254.1
–
VX-6R O
74.4
77.0
79.7
91.5
94.8
97.4
110.9
114.8
118.8
–
–
–
M
Advertisement
Table of Contents
