Table of Contents
Advertisement
S
M
R
S
Enables/Disables the Automatic Repeater Shift function.
Sets the Repeater Shift Direction.
Sets the magnitude of the repeater Shift.
CTCSS/DCS S
Selects the number of CTCSS/DCS Bell ringer repetitions.
Setting of the DCS code.
Enables/Disables "Inverted" DCS code decoding.
Enables/Disables the DTMF Autodial feature.
Programming of the DTMF Autodialer.
Sets the Squelch threshold level.
Selects the Tone Encoder and/or Decoder mode.
Setting of the CTCSS Tone Frequency.
ARTS S
Selects the Beep option during ARTS operation.
Selects the Polling Interval during ARTS operation.
Programs and activates the CW Identifier.
M
S
Stores Alpha-Numeric "Tags" for the Memory Group.
Enables/Disables over-written the Direct Memory Recall Channel while operating on the Direct
Memory Recall Channel.
Selects the method of selection of channels for Memory Storage.
Toggles the display indication between "Frequency" and the channel's "Alpha/Numeric Tag."
Stores Alpha-Numeric "Tags" for the Memory channels.
S
S
Selects the Scan Resume mode.
Enables/Disables the Scan lamp while paused.
Selects the Memory Scan "Skip•Echannel-selection mode.
Enables/Disables the Weather Alert Scan feature.
Enables/Disables the receiver audio output during the Tone Serch Scanner is activated.
Selects the Tone Serch Scanner speed.
P
S
S
Selects the Receive-mode Battery Saver interval.
Enables/Disables the Transmitter Battery Saver.
Setting of the Wakeup feature.
WIRES S
Selects the Access Number (DTMF digit) for WIRES TM operation.
Selects the Internet Link Connection mode.
Selects the memory register for an Access Number (DTMF code) for non-WIRES TM Internet
Link System access.
Enables/Disables DTMF Autodialer feature while operating on the Internet Connection feature.
EAI S
Enables/Disables the Emergency Automatic ID (EAI) Feature.
Setting of the Emergency Automatic ID (EAI) operating mode and its Transmit Time.
Selects the alarm(s) utilized when the Emergency function is engaged.
EPCS S
Enables/disables the Enhanced CTCSS Paging & Code Squelch function.
Enables/disables the Answer Back function of the Enhanced CTCSS Paging & Code Squelch.
Setting the Receiver Pager Code for the Enhanced CTCSS Paging & Code Squelch.
Setting the Transmitting Pager Code for the Enhanced CTCSS Paging & Code Squelch.
1: Depends on the frequency band.
90
M
S M
I
A
V
4 [ARS]
ON / OFF
51 [RPT]
SIMP / –RPT / +RPT
56 [SHIFT]
0.00 - 149.95 MHz
S M
I
A
V
8 [BELL]
OFF / 1 / 3 / 5 / 8 /
CONT (Continuous ringing)
17 [DCS CD]
104 standard DCS codes (023)
18 [DCS RV]
DISABLE / ENABLE
21 [DT A/M]
MANUAL / AUTO
22 [DT SET]
---
59 [SQL]
LVL 0 - LVL 15 (NFM: LVL 1),
LVL 0 - LVL 8 (WFM: LVL 2)
60 [SQL.TYP]
OFF / TONE / T SQL /
DCS / RV TN
66 [TN FRQ]
50 standard CTCSS tones (100 Hz)
S M
I
A
V
2 [AR BEP]
IN RNG / ALWAYS / OFF
3 [AR INT]
25 SEC / 15 SEC
14 [CW ID]
--
S M
I
A
V
10 [BNK NM]
--
20 [DMR.WRT]
ON / OFF
38 [MW MD]
NEXT / LOWER
39 [NAME]
FREQ / ALPHA
40 [NM SET]
--
S M
I
A
V
49 [RESUME]
3SEC / 5SEC / 10SEC /
BUSY / HOLD
55 [SCN.LMP]
ON / OFF
57 [SKIP]
OFF / SKIP / ONLY
73 [WX ALT]
OFF / ON
68 [TS MUT]
ON / OFF
69 [TS SPD]
FAST / SLOW
S M
I
A
V
53 [RXSAVE]
200 MS / 300 MS / 500 MS /
1 S / 2 S / OFF
70 [TXSAVE]
OFF / ON
72 [WAKEUP]
OFF / 5S / 10S / 20S / 30S / EAI
S M
I
A
V
29 [INT CD]
DTMF 1 - DTMF F
30 [INT MD]
SRG / FRG
31 [INT.A/M]
MANUAL / AUTO
32 [INT.SET]
--
S M
I
A
V
23 [EAI]
OFF / ON
24 [EAI.TMR]
INT. 1M through INT.10M,
INT.15M, INT.20M, INT.30M,
INT.40M, INT. 50M,
CON. 1M through CON.10M,
CON.15M, CON.20M, CON.30M,
CON.40M, and CON. 50M
(CON. 5M)
26 [EMG S]
BP+STR / BEAM / BP+BEM / CW /
BP+CW / BEEP / STROBE
S M
I
A
V
43 [PAGER]
OFF / ON
44 [PAG.ABK]
OFF / ON
(05 _ 47)
45 [PAG.CDR]
(05 _ 47)
46 [PAG.CDT]
VX-6R O
1
M
Advertisement
Table of Contents
